Spinning Technology Articles and Studies Resources Man-made

Technical paper presenting observations of cavitation that occur inside a capillary die during the spinning process of polyethylene fibers. Authors: Younggon Son and Kalman B. Migler.

• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part V - Fourth chapter of A. J. van der Goot\\'s articles and studies spinning technology Doctoral thesis on polymer extruders for styrene based articles and studies spinning technology polymers, describing the copolymerisation of styrene-n-butylmethacrylate in a articles and studies spinning technology counter-rotating twin screw extruder.[PDF]
• Synthetic Fibers - Study of hazardous emissions during the manufacturing processes articles and studies articles and studies of man-made fibers. Detailed descriptions of polymer materials, articles and studies articles and studies and the dry- and solvent fiber spinning technologies articles and studies articles and studies and processes. Glossary of terms. Tables and figures. articles and studies articles and studies List of references.[PDF]
• 3-D Microscope Using Diffraction Grating - Technical paper about the adaptation of an optical microscope for articles and studies three-dimensional inspection of small capillaries in spinnerets by placing a articles and studies diffraction grating between the microscope objective and the specimen. Authors: articles and studies Tom DeWitt and Douglas Lyon.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part VIIII - Eighth chapter of A. J. van der Goot\\'s articles and studies articles and studies Doctoral thesis on polymer extruders for styrene based articles and studies articles and studies polymers, describing the possibilities of reactive extrusion for articles and studies articles and studies making polymer blends.[PDF]
• Elongational Flows in Polymer Processing - Doctoral theses discussing the quasilinear hyperbolic equations of melt-spinning polymeric fibers in viscous and viscoelastic flow which model the uniaxial extension of a fluid threat before its solidification. Author: Thomas Cristoph Hagen.[PDF]
• Cavitation of Polyethylene during Extrusion Processing Instabilities - Technical paper presenting observations of cavitation that occur inside a spinning technology capillary die during the spinning process of polyethylene fibers. Authors: spinning technology Younggon Son and Kalman B. Migler.[PDF]
• Electrospinning of Low Surface Energy Quarternary Ammonium Salt Containing Polymers and Their Antibacterial Activity - Technical paper about research into electrospinning of antibacterial resources agents containing spinning technology perfluorinated polymers to create fibers for resources antifouling applications in air spinning technology filtration, marine products and resources medicine. Authors: Kazim Acatay and others.[PDF]
• Simulation of the Fiber Spinning Process - Technical paper describing a fiber model coupled with CFD calculations articles and studies of the quench air flow, used to simulate the influence articles and studies of process parameters to the melt spinning process. Authors: T. articles and studies Goetz and others.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part IV - Third chapter of A. J. van der Goot\\'s Doctoral thesis articles and studies on polymer extruders for styrene based polymers, providing an overview articles and studies of the applications of polystyrene and styrene copolymers and a articles and studies theoretical and experimental evaluation of the polymerisation rate[PDF]
• Investigation of the High Speed Spinning Process of Polyethylene Terephthalate - Technical paper presenting an experiment measuring wide-angle diffraction articles and studies during high speed spinning of polyethylene terephthalate (PET) articles and studies using synchroton radiation. Authors: R. Klob and others.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part VIII - Seventh chapter of A. J. van der Goot\\'s articles and studies Doctoral thesis on polymer extruders for styrene based articles and studies polymers, describing the development of a new theory articles and studies concerning reactive extrusion, resulting in a new optimisation articles and studies diagram for the extruder used as a polymeris[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part XI - Tenth chapter of A. J. van der Goot\\'s Doctoral thesis on polymer extruders for styrene based polymers, providing a Dutch language summary of the thesis.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part III - Second chapter of A. J. van der Goot\\'s Doctoral thesis on polymer extruders for styrene based polymers, focused on a theoretical description and investigation of the intermeshing counter-rotating twin screw extruder.[PDF]
• Isothermal Viscoelastic Fiber Spinning Model - Description and mathematical model of meltspinning process. From articles and studies spinning technology Dr. Greg Beaucage homepage.
• A Study of Spin Finish Application on a Fiber - Scientific dissertation on the understanding of wetting phenomena on cylindrically spinning technology symmetrical objects, important for spin finish applications in the man-made spinning technology fiber industry. Author: Eunkyoung Shim.[PDF]
• Creep of Gel-Spun Polyethylene Fibers; Improvements by Impregnation and Crosslinking - Doctor of Science thesis about research into improving the creep resistance of gel-spun polyethylene fibers through supercritical CO2 assisted impregnation with benzophenone, followed by ultraviolet irradiated crosslinking. Author: M.J.N. Jacobs.[PDF]
• New Methods for Producing Nylon 6.6 Fibers with Enhanced Mechanical Properties - Doctor of Philosophy dissertation about the development of a new articles and studies method for dry-jet wet spinning of GaCl3/polyamide 66 with increased articles and studies low draw ratio by disrupting the interchain hydrogen bondsed network. articles and studies Author: Jung Dongwook.[PDF]
• Electrospinning Carbon Nanotube Polymer Composite Nanofibers - Technical paper presenting an overview of current developments spinning technology in pre-processing, synthesis and characterization of electrospun polymer spinning technology composite nanofibers, including the theoretical modelling of these spinning technology fiber systems. Authors: Leslie Y. Yeo and James spinning technology R. F[PDF]
• A Fundamental Investigation of the Formation and Properties of Electrospun Fibers - Technical paper describing a new project with the objective of developing fundamental engineering science and technology for electrostatic fiber production. Authors: S.B. Warner and others.[PDF]
• The Influence of Branching and Intermolecular Interactions on the Formation of Electrospun Fibers - Doctor of Philosophy thesis investigating the implications of chain topology and intermolecular interactions on the electrospinning process for linear and randomly branched polymer fibers. Author: Matthew G. McKee.[PDF]
• Fabrication of Aligned PVA Nanofibers by Electrospinning - Technical paper describing a novel method for the spinning technology fabrication articles and studies of an uniaxially-aligned electrospun polyvinyl alcohol (PVA) spinning technology fiber tow, articles and studies obtained by utilizing two stainless steel spinning technology wires vertically set articles and studies in a parallel manner between spinning technology a charged needle and articles and studies a ground[PDF]
• High-Speed Gel-Spinning of Ultra-High Molecular Weight Polyethylene - Technical paper reporting on an experiment in gel-spinning of ultra-high molecular weight polyethylene (UHMWPE) in parafin oil at speeds of 1500 meters per minute and around 200 degrees Centigrade, yielding filaments with a tensile strength of 3.5 GPa. Au[PDF]
• Melt-Spinning and Laser-Heated Drawing of a New Semi-Aromatic Polyamide, PA9-T Fiber - Extensive technical paper describing the manufacture of melt-spun fibers of a new semi-aromatic polyamide (PA9-T), which were subsequently drawn with a CO2 laser-heated drawing system at different draw ratios and various drawing velocities. Authors: Ahmed[PDF]
• Electroless Deposition of Nickel on Electrospun Fibers - Technical paper presenting the results of experimental work, combining electrospinning technology and electroless deposition techniques to prepare metal-coated conductive nonwoven fiber mats. Authors: N.J. Pinto and others.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part 1 - Title page, acknowledgments and index of A. J. van der spinning technology Goot\'s Doctoral thesis on polymer extruders for styrene based polymers.[PDF]
• Structure-Properties Relationships in Polymeric Fibres - Doctoral thesis about an investigation into the relationship articles and studies between the structure and mechanical properties of high articles and studies molecular weight gel-spun polyethylene fibers. Author: Jan Paul articles and studies Penning.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part VI - Fifth chapter of A. J. van der Goot\\'s resources Doctoral thesis articles and studies on polymer extruders for styrene based resources polymers, focusing on the articles and studies influence of the polymer resources melt viscosity on the working domain articles and studies in reactive resources extrusion.[PDF]
• Structure Development in Polyketone and Polyalcohol Fibers - Doctoral thesis about the structural development in oriented articles and studies articles and studies perfectly alternating ethylene-carbon monoxide copolymer (polyketone) fiber, and articles and studies articles and studies new polyalcohol fibers obtained by reduction of polyketone. articles and studies articles and studies Author: Bert Jan Lommerts.[PDF]
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 7 - Fifth chapter of Pankaj Gupta\\'s doctoral thesis about resources electrospinning of articles and studies polymeric fibers, investigating the possibilities of resources manufacturing bi-component fibers.[PDF]
• Theoretical Studies of Hollow Fiber Spinning - Doctor of Philosophy dissertation presenting and theoretical analysis of the articles and studies hollow fiber spinning process. Author: Yang Su.
• An Internet-Accessible Software Package for Modelling Viscoelastic Flow - Extensive article focusing on research and development of spinning technology a web-based C++ software package which numerically models spinning technology viscoelastic flow in polymer processing. Authors: J. Barr spinning technology von Oehsen and others.[PDF]
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 1 - Title page of a Doctor of Philosophy thesis articles and studies spinning technology on electrospinning of polymeric fibers. Author: Pankaj Gupta.[PDF]
• Melt Spinning - Report of a laboratory project in melt spinning articles and studies resources of polymers, co-polymers and blends into fiber for articles and studies resources yarn manufacture and nonwovens. Flow charts. Basic equations. articles and studies resources From the Institute for Polymer Research Dresden. Authors: articles and studies resources Prof. Dr. Roland Beyreuther and othe
• The Effects of Processing Variables on the Morphology of Electrospun Nanofibers and Textiles - Extensive technical paper evaluating the effects of spinning voltage and spinning technology solution concentration on the morphology of electrospun polymeric fibers. Authors: spinning technology J.M. Deitzel and others.[PDF]
• Regenerated Silk Fiber Wet Spinning from an Ionic Liquid Solution - Scientific article about extruding regenerated silk fibroin from Bombix Mori articles and studies silk worms, using 1-ethyl-3-methylimidazolium chloride ionic liquid solvent. From the articles and studies Journal of Materials Chemistry. Authors: David M. Phillips and others.
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 3 - First chapter of Pankaj Gupta\\'s doctoral thesis about electrospinning of articles and studies polymeric fibers, providing an introduction to the electrospinning technology and articles and studies a literature review.[PDF]
• Biopersistence of Man-made Fibers by Animal Inhalation Experiments in Recent Reports - Study showing that the biopersistence and maximum tolerated articles and studies dose are important factors for the hazard assessment articles and studies of man-made fibers, in addition to fiber size, articles and studies chemical composition and surface properties. Authors: Isamu Tanaka articles and studies and others.[PDF]
• Electrospinning: A Whipping Fluid Jet Generates Submicron Polymer Fibers - Technical paper describing the phenomena responsible for the onset of whipping during the electrospinning process, and the behaviour of two competing instabilities; the Raleigh mode and the axisymmetric conducting mode. Authors: Y.M. Shin and others.[PDF]
• On Viscoelastic Fluids in Elongation - Scientific paper proving the existence and uniqueness result resources for the isothermal elongational flow of fluids with resources differential constitutive law of Maxwell type in the resources production of polymeric filaments. Author: Thomas Hagen.[PDF]
• Simulation of Multifilament Semicrystalline Polymer Fiber Melt-Spinning - Technical paper presenting a new simulation model for spinning technology melt spinning technology spinning of multi-filament isotactic polypropylene and polyethylene spinning technology terephthalate fibers. spinning technology Authors: Young-Pyo Jeon and Christopher L. spinning technology Cox.[PDF]
• Electrospinning and Electrically Forced Jets. I. Stability Theory - First part of a series of technical papers analysing the mechanics of the rapidly whipping fluid jet in electrospinning, developing an asymptotic approximation of the equations of electrohydrodynamics for quantitative comparisons in experiments. Authors:[PDF]
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 6 - Fourth chapter of Pankaj Gupta\\'s doctoral thesis about articles and studies electrospinning of polymeric fibers, presenting the results of articles and studies an investigation into the creation of a flexible articles and studies superparamagnetic substrate by incorporating nano-sized ferrite particles of articles and studies Mn-Zn-Ni in[PDF]
• Neck Formation in Drawing Processes of Fibers - Technical paper focused on an analysis of the strain distribution articles and studies during the drawing processes of polymeric fibers to enhance understanding articles and studies of neck formation in the process of spinning. Authors: Kwansoo articles and studies Chung and others.[PDF]
• Process Optimization and Emperical Modelling Using Response Surface Methodology - Scientific paper about the modelling and optimization of resources the electrospinning process parameters for the spinning of resources regenerated nanoscale Bombyx mori silk fibers, using the resources response surface methodology. Authors: Sachiko Sukigara and others.[PDF]
• A Nonlinear Instability of Viscoelastic Poiseuille Flow - Technical paper presenting qualitative and quantitative evidence of spinning technology the spinning technology existence of an intrinsic route towards non-linear spinning technology instability of spinning technology viscoelastic Poiseuille flow which is limiting spinning technology the extrusion rate spinning technology of polymer fibers. Authors: Volfango spinning technology Bertola and ot[PDF]
• Feasibility of Electrospinning the Globular Proteins Hemoglobin and Myoglobin - Scientific paper describing the process of electrospinning of two globular proteins hemoglobin and myoglobin into nonwoven structures to be used as an oxygen delivering scaffold for optimal wound healing. Authors: Catherine P. Barnes and others.[PDF]
• Interferometric Studies for the Annealing Effects on the Necking Deformation along Polypropylene Fibers - Technical paper, describing test procedures under different conditions of the annealing process, to investigate a method by which necking deformation of polypropylene fiber axis due to fast drawing processes could be avoided. Authors: Hassan Mohamed El-De[PDF]
• Electrospinning and Nanofibers - Doctor of Philosophy dissertation presenting the theory of electrospinning of resources polymer nanofibers and a theoretical model with which to predict resources experimental results. Author: Tao Han.
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part XII - Eleventh chapter of A. J. van der Goot\\'s resources Doctoral thesis on polymer extruders for styrene based resources polymers, providing a summary of the thesis.[PDF]
• In Situ Small-Angle X-Ray Scattering Experiment in Melt Spinning of High-Density Polyethylene - Technical paper reporting on an in situ experiment to determine the effect of flow on the structure formation in polymeric melt under non-isothermal conditions. Authors: Hiroki Murase and others.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part X - Ninth chapter of A. J. van der Goot\\'s articles and studies resources Doctoral thesis on polymer extruders for styrene based articles and studies resources polymers, outlining the conclusions concerning the theory of articles and studies resources the extruder and the resulting product properties.[PDF]
• Allometric Scaling and Instability in Electrospinning - Technical paper discussing the regulatory mechanisms for controlling the radius spinning technology of electrospun fibers. Authors: Ji-Huan He and others.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part VII - Sixth chapter of A. J. van der Goot\\'s Doctoral thesis resources on polymer extruders for styrene based polymers, dealing with the resources rate of polymerisation on the working domain in reactive extrusion.[PDF]
• Melt-Spinning Dynamics of Phan-Thien Tanner Fluids - Technical paper about an investigation into the dynamic articles and studies resources behaviour of non-isothermal melt-spinning by employing the Phan-Thien articles and studies resources Tanner (PTT) fluids model. Author: Joo Sung Lee articles and studies resources and others.[PDF]
• Electrospinning and Electrically Forced Jets. II. Applications - Part two of a technical paper, presenting the development of spinning technology a quantitative method for predicting when electrospinning occurs, based on spinning technology the stability theory of the first part of this paper. spinning technology Authors: Moses M. Hohman and others.[PDF]
• SAXS Experiments on Gel-Spun Polyethylene Fibers - Technical paper about performing meridional SAXS experiments on spinning technology gel-spun spinning technology polyethylene fiber in order to identify their spinning technology structure after spinning technology the spinning process. Authors: W. Hoogsteen, spinning technology A.J. Pennings and spinning technology G. ten Brinke.[PDF]
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 4 - Second chapter of Pankaj Gupta\\'s doctoral thesis about resources electrospinning of spinning technology polymeric fibers, exploring the relationships between resources fiber formation, viscosity, molecular spinning technology weight and concentration in resources a solvent.[PDF]
• Tensile Behaviour of Polyethylene and Poly(p-xylylene) Fibers - Doctoral thesis about the tensile strength and modulus resources of polyethylene articles and studies fibers obtained by gel-spinning and by resources spinning with the surface-growth articles and studies method. Author: Harm van resources der Werf.[PDF]
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 5 - Third chapter of Pankaj Gupta\\'s doctoral thesis about resources electrospinning of resources polymeric fibers, focused on in-situ photocrosslinking resources of cinnamate functionalized poly(methyl resources methacrylate-CO2-hydroxy ethyl acrylate) fibers resources during the electrospinning process.[PDF]
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 8 - Sixth chapter of Pankaj Gupta\\'s doctoral thesis about electrospinning of resources polymeric fibers, focusing on the examination of the effect of resources electrospinning on inducing charges of different polarity on two electrically resources dissimilar polymers, and determine the ef[PDF]
• Methematical Models for a Rotor Spinning Process - Interim research report for a Master of Science spinning technology thesis spinning technology about the development of various methematical models spinning technology for rotor spinning technology spinning of para-aramid polymers. Author: Everdien spinning technology Kolk.[PDF]
• Regeneration of Bombix Mori Silk Nanifibers and Nanocomposite Fibrils by the Electrospinning Proces - Doctor of Philosophy thesis about the scientific implications and potential resources applications of reducing the diameter of Bombix mori silkworm fibers resources to nanoscale, changing its triangular shape and adding nanofillers in resources the form of single wall carbon nanotubes[PDF]
• Crystal Structure, Conformation and Morphology of Solution-Spun Polylactide Fibers - Technical paper describing two different crystal structures which resources are obtained with solution spinning of polylactide (PLA) resources fibers, depending on spinning and drawing conditions. Authors: resources W. Hoogsteen and others.[PDF]
• The Extruder as a Polymerisation Reactor for Styrene Based Polymers. Part II - First chapter of A. J. van der Goot\\'s spinning technology Doctoral thesis on polymer extruders for styrene based spinning technology polymers, containing an introduction to and a description spinning technology of the thesis.[PDF]
• Electrospinning of Ceramic and Nanocomposite Nanofibers - Master of Science thesis discussing the principles of resources the electrospinning resources process; and electric field strength and resources point-to-plate distance, and the resources distance between the emission resources point and the collection point which resources effect the resources process of forming a nonwoven[PDF]
• Processing, Structure and Property Studies of Submicron Fibers Produced By Electrospinning. 2 - Pankaj Gupta\\'s introduction to his doctoral thesis about spinning technology electrospinning articles and studies of polymeric fibers, containing a detailed description spinning technology of his articles and studies work, acknowledgments and contents of the spinning technology thesis.[PDF]
• Bicomponent Extrusion - Feature article about a novel process for bi-component spinning technology extrusion of core/sheath ceramic fibers for applications in spinning technology metal and ceramic matrix composites. Author: Gerard Curran.
• Texture Evolution of Sheared Liquid Chrystalline Polymers - Extensive technical paper presenting the results of a resources theoretical and experimental study of the textural evolution resources of liquid crystal polymer (LCP) systems under planar resources shear at high shear rates, based on computational resources simulation using a molecular model wi[PDF]
• DSC Experiments on Gel-Spun Polyethylene Fibers - Technical paper about distinguishing lamellar structures in gel-spun articles and studies spinning technology polyethylene fibers through DSC experimenting on strained fibers, articles and studies spinning technology on the basis of which qualitative predictions of articles and studies spinning technology the final tensile properties can be made. Authors: articles and studies spinning technology W. Hoogsteen, G. ten[PDF]

   MySQL - Cache Direct